WELCOME TO Tell Qi (Tianjin) International Trade Co., Ltd.

motorcycle bearings

motorcycle bearings
Author :Admin | Publish Date:2013-06-19 11:44:09
Motorcycle bearings should last for years and provide you with thousands of miles of travel---but they won't last forever. In some cases they even fail completely if they haven't been maintained correctly. Part of a maintenance schedule should include replacement of wheel bearings before they fail. The procedure isn't that difficult if you have about an hour and a few small tools. Front and back wheels are similar in procedure to change bearings and only require slightly different tooling.


Take the wheels off the bicycle beef before greasing the wheel bearings.A mixture of 50 percent white teflon bicycle grease and 50 percent green axle grease works well on motorcycle bearings.Don't make the bearing cone too tight when screwing it back into place. Motorcycle bearings shouldn't have any play in them and need to roll smoothly.


This is later. Motorcycle bearings come nicely snug into crowns these days, but sometimes you still find some that are just put loose in the wheel hub. To avoid all of them crashing to the ground with the possibility of vanishing for ever, grab the axle on the side that is still locked in place and point the end that you've just loosened,up. Now it is time to unscrew the locking nut almost completely off the axle. Next, unscrew the fag bearing cone to expose the wheel bearings to the light of day. Any grease in there? You'd be surprised on how often I open up brand new bikes and find almost nothing.


Motorcycle bearings should last for years and provide you with thousands of miles of travel---but they won't last forever. In some cases they even fail completely if they haven't been maintained correctly. Part of a maintenance schedule should include replacement of wheel bearings before they fail. The procedure isn't that difficult if you have about an hour and a few small tools. Front and back wheels are similar in procedure to change bearings and only require slightly different tooling.


motorcycle bearings should last for years and provide you with thousands of miles of travel---but they won't last forever. In some cases they even fail completely if they haven't been maintained correctly. Part of a maintenance schedule should include replacement of motorcycle bearings before they fail. The procedure isn't that difficult if you have about an hour and a few small tools. Front and back wheels are similar in procedure to change koyo bearings and only require slightly different tooling.


Take the wheels off the bicycle beef before greasing the motorcycle bearings.A mixture of 50 percent white teflon bicycle grease and 50 percent green axle grease works well on  motorcycle bearings.Don't make the bearing cone too tight when screwing it back into place. Bicycle motorcycle bearings shouldn't have any play in them and need to roll smoothly.


"motorcycle bearings"  support the wheel hubs on the axles. Bearings require a certain amount of pressure, otherwise referred to as preload. The specific amount of preload determines the number of bearings that support the wheel hubs at any given time. Cone flats thread onto the axles and press bearing cones against the bearings. Adjusting bearing cone preload prolongs the life of the bearings. With proper preload, light drag should be noticed when spinning the wheels.


BRING SKF ALS 40 
BRING SKF ALS 48 
BRING SKF AMS  8            (1 X 2 1/2 X 3/4) 

Contact Us

TEL:0086-022-83717568
FAX:0086-022-83717567
Email:taierqi@126.com
Add:Room Room#710-1 ,D Block ,Hi-Tech Information Square , Huayuan Industrial Park ,Nankai District ,Tianjin City ,China.

ina information lists

Copyright © 2014 Tell Qi (Tianjin) International Trade Co., Ltd. All rights reserved. TEL:0086-022-83717568 FAX:0086-022-83717567 Email:taierqi@126.com